D12 78 PER METRE

D12 78 PER METRE
12 78 is Marlow's premium range of pre-stretched 12 strand ropes manufactured using bio-based Dyneema SK78 and is available in sizes up to 22mm diameter. D12 78 is characterised by it is lightweight, low stretch and high strength making it an ideal rope for the replacement of steel wire. Strength

Variants

0 of 40 products shown
Item no.
No products found.

Description

12 78 is Marlow's premium range of pre-stretched 12 strand ropes manufactured using bio-based Dyneema SK78 and is available in sizes up to 22mm diameter. D12 78 is characterised by it is lightweight, low stretch and high strength making it an ideal rope for the replacement of steel wire. Strength for strength, D12 78 is 8 times lighter than an equivalent steel wire rope and exhibits none of the drawbacks with steel such as corrosion, wire spliters and dangerous recoil in the case of system failure.  D12 78 has Marlow's ArmourCoat coating as standard which increases abrasion resistance and its coefficient of friction.  However, Marlow also have a range of coatings to tackle issues such as flex fatigue and heat generation.
BENEFITS: 
  • High strength
  • Low creep
  • Low elongation
  • Very light weight
  • Made with bio-based Dyneema fibre
  • ArmourCoat improves grip
  • Easily Inspected
  • Easily repaired
  • Easily spliced
  • Excellent abrasion resistance
  • Good chemical resistance
  • Good UV resistance
  • Minimal recoil
  • Reduced diameters
  • Zero water shrinkage
D12 78 DATASHEET
D12 78 PER METRE

D12 78 PER METRE

12 78 is Marlow's premium range of pre-stretched 12 strand ropes manufactured using bio-based Dyneema SK78 and is available in sizes up to 22mm diameter. D12 78 is characterised by it is lightweight, low stretch and high strength making it an ideal rope for the replacement of steel wire. Strength for strength, D12 78 is 8 times lighter than an equivalent steel wire rope and exhibits none of the drawbacks with steel such as corrosion, wire spliters and dangerous recoil in the case of system failure.  D12 78 has Marlow's ArmourCoat coating as standard which increases abrasion resistance and its coefficient of friction.  However, Marlow also have a range of coatings to tackle issues such as flex fatigue and heat generation.
BENEFITS: 
  • High strength
  • Low creep
  • Low elongation
  • Very light weight
  • Made with bio-based Dyneema fibre
  • ArmourCoat improves grip
  • Easily Inspected
  • Easily repaired
  • Easily spliced
  • Excellent abrasion resistance
  • Good chemical resistance
  • Good UV resistance
  • Minimal recoil
  • Reduced diameters
  • Zero water shrinkage
D12 78 DATASHEET

Variants

Item no.
No products found.